STC-10

Sontronics
$269.00
Quantity
  • Description

Based on the ever-popular STC-1 pencil mic, the Sontronics® STC-10 was launched with four other products to mark our 5th anniversary in 2010.

Designed with exactly the same internal architecture as our other pencil mics, the STC-10 was purposely created to give producers and musicians an extremely affordable entry point into the ever-growing Sontronics® range, without any sacrifice in sound or build quality.

Far from being a 'basic' microphone, the STC-10 is ideal for any spot-miking application, boasting our signature super-smooth high-frequency roll-off. It also offers excellent flexibility thanks to its two-stage high-pass filter and attenuation pad switches.

As a result, STC-10 gives superb results on acoustic guitar and other strummed instruments, solo strings, woodwind and percussion instruments, and also on guitar amps and brass. A pair of STC-10s is brilliant for drumkit and ensemble recording too.

The Sontronics STC-10 can also be used for overhead recording (on its own or in pairs) as well as film production or video work, field recording, stage productions and for all kinds of stereo miking techniques.

Every studio should have at least one STC-10!

STC-10 HIGHLIGHTS
• great-value small-diaphragm condenser mic
• fixed cardioid pattern
• ideal for direct-miking instruments and percussion
• with mic clip and foam windshield
• covered by LIFETIME WARRANTY

RECOMMENDED FOR…
• acoustic guitar and guitar amps
• solo woodwind & strings
• percussion
• sitar, bouzouki and banjo
• string, brass or wind ensemble
• video/film & field recording
• foley work
• in pairs for drumkit, overhead &
room miking

STC-10 SPECIFICATIONS
Polar pattern: Cardioid
Pad: 0, -10db
High-pass filter: linear, 75Hz
Frequency response: 30Hz - 20kHz
Sensitivity: 11mV/Pa -39dB ±2dB
(0dB = 1V/Pa @ 1,000Hz)
Impedance: ≤200 Ohms
Equivalent noise level: 18dB
(A-weighted)
Max SPL: 130dB (for 0.5% THD @ 1kHz)
Power source: 48V ±4V phantom power required
Connector: Three-pin XLR
Dimensions: 150 x 21 x 21mm
Weight: 120g
Supplied with: Mic clip, foam windshield

    Like all Sontronics® mics, the STC-10 is covered by a no-nonsense LIFETIME WARRANTY.

    • Description

    Based on the ever-popular STC-1 pencil mic, the Sontronics® STC-10 was launched with four other products to mark our 5th anniversary in 2010.

    Designed with exactly the same internal architecture as our other pencil mics, the STC-10 was purposely created to give producers and musicians an extremely affordable entry point into the ever-growing Sontronics® range, without any sacrifice in sound or build quality.

    Far from being a 'basic' microphone, the STC-10 is ideal for any spot-miking application, boasting our signature super-smooth high-frequency roll-off. It also offers excellent flexibility thanks to its two-stage high-pass filter and attenuation pad switches.

    As a result, STC-10 gives superb results on acoustic guitar and other strummed instruments, solo strings, woodwind and percussion instruments, and also on guitar amps and brass. A pair of STC-10s is brilliant for drumkit and ensemble recording too.

    The Sontronics STC-10 can also be used for overhead recording (on its own or in pairs) as well as film production or video work, field recording, stage productions and for all kinds of stereo miking techniques.

    Every studio should have at least one STC-10!

    STC-10 HIGHLIGHTS
    • great-value small-diaphragm condenser mic
    • fixed cardioid pattern
    • ideal for direct-miking instruments and percussion
    • with mic clip and foam windshield
    • covered by LIFETIME WARRANTY

    RECOMMENDED FOR…
    • acoustic guitar and guitar amps
    • solo woodwind & strings
    • percussion
    • sitar, bouzouki and banjo
    • string, brass or wind ensemble
    • video/film & field recording
    • foley work
    • in pairs for drumkit, overhead &
    room miking

    STC-10 SPECIFICATIONS
    Polar pattern: Cardioid
    Pad: 0, -10db
    High-pass filter: linear, 75Hz
    Frequency response: 30Hz - 20kHz
    Sensitivity: 11mV/Pa -39dB ±2dB
    (0dB = 1V/Pa @ 1,000Hz)
    Impedance: ≤200 Ohms
    Equivalent noise level: 18dB
    (A-weighted)
    Max SPL: 130dB (for 0.5% THD @ 1kHz)
    Power source: 48V ±4V phantom power required
    Connector: Three-pin XLR
    Dimensions: 150 x 21 x 21mm
    Weight: 120g
    Supplied with: Mic clip, foam windshield

      Like all Sontronics® mics, the STC-10 is covered by a no-nonsense LIFETIME WARRANTY.